heatpress transfer to flat items such as T-shirts, ceramic plates, rugs mouse, puzzles, etc.

heat press machine can be used for T-shirts, caps, ceramic plates, ceramic tiles, mugs, coasters, mouse pads, puzzles, lettering, other materials and fabrics. It can transfer images and colorful characters of sublimating and dissolved printing ink to ceramics, glasses and textiles such as cotton, linen, chemical fiber, nylon, etc. this all-in-one press includes flat tray, cups and plates. The swivel heat press has all the essential accessories. It has a built-in Teflon coating 15 “x 15” (38 X38 cm) heating plate with a full range of heating coils to allow consistency over its entire surface. The digital timer control is adjustable up to 999 seconds. It has a digital temperature gauge ranging from 0 to 250 ° C (approximately 480 ° F).
Large 15 “x 15” Transfer Element – The 15 “x 15” (38 X 38 cm) hotplate provides a large surface area to transfer to flat items such as T-shirts, ceramic plates, rugs mouse, puzzles, etc.
Digital LED Control -Preset desired temperature and timer. Intelligent sound alarm after transfer completed.
Full 360 degree rotation of the swivel design-Allows the heating element to be moved aside safely and reduces the risk of accidental contact.
Full Range Pressure Adjustment Knob – This adjusts the pressure based on the thickness of the material you are transferring to.
Teflon Coated Plate Press Element -The surface is non-stick, preventing transfer burn-off, and does not require a separate silicone / teflon sheet.
2 4/5 “Long arm handle -Comfortable rubber grip for daily use and long production runs.
Detachable lower platform -It is raised with two brackets. Easily interchange with other items.
Adjustable multi-spring balancer -Allows a more even distribution of pressure over the entire plate when closed.
4/5 “thick heating panel -Built-in structural support to maintain flatness. Warm up quickly and provide even heating.
Aluminum alloy cradle upgrade -Cradle detached for use of mug elements. compact and lightweight, compared to standard cup cradles

Temperature setting:
Press “SET”, the top screen will show “SP”, and the bottom of the screen will show the temperature of the last setting. Then enter the temperature setting option, press ▼ or ▲ (increase or decrease) to set the required temperature. After setting well, please press “set”, upper display will show “SK” to move to the next step for time

setting Time setting:
Press “set” again, H1 LDE will display “ST”, then enter the time setting. Press the ▼ key (increase or decrease) to set the time required. (Normally the time is 180 seconds for mugs and 15-20 seconds for t-shirt printing)

Fault diagnosis and solution:
1.If the controller box shows nothing when power on, there are 2 solutions:
A. Please check the fuse wire, checking the glass wire to see if the wire damaged or fused, if it is damaged, please change the wire.
B. Open the back cover of the controller box and examine the electrical box to see if any wire falls off or not, if it falls off, please match it accordingly.
2.When power on, if the controller display shows 3 lines, please take out the heating plate and replace it with another heating panel or cup warmer. If the display is normal, then maybe is the second situation of “b”, the wire wire has been disconnected. If still showing 3 line, then is the first situation of “a”, the plug wire has been falling off or breaking.
A. Check the inner wire of the controller box, the white metal plug with 4 lines, please check if the thread is broken or disconnected, if you disconnect it, please match it accordingly or replace it.
B. check the heating board wire, the red cycle indicates the ends of the cable, one end is 3 wires, please replace 2 wires will be ok.
3.When power on, the controller box will show the values ​​but can not heat up: the display showing the actual room temperature, please take out the plug from the head machine, and replaced it with d ” other hot or hot plate cups. If the temperature is heating normally, then will be the next situation “a”, if cannot heat, will be “b” situation.
A. Check the heating wire, the red cycle showing the ends of the wire, please replace the white wire will be ok.
B. open the back cover and examine the wire to see if any wire is disconnected or broken, if it is disconnected, please follow the “a” above, if nothing is displayed, please follow “b” to the maintenance. If no break, then replace the controller box.
4.The head controller case heating normally, other parts will not heat up, please directly change the heating part.
5. The function of the main machine is ok, but can’t count down, so please press the third button, this machine will count down. If you still can’t count, please replace the controller box.

Application:
This heat press has multiple functions in one machine, it can be used to transfer to t-shirt, mug, plate, cap, etc. In addition, the heating accessory can be attached. It can swing 180 degrees and is conveni