Meet a seller in public place and be sure to pay only after collecting your item.
Learn More
Up until now, there has always been a
compromise between frequency and
sensitivity when optimising detector
performance, because lower frequencies
are more sensitive to larger gold nuggets
and higher frequencies are more
sensitive to smaller gold nuggets…
When comparing detectors, the three
curves in the diagram represent each
detector’s ability to find small gold
nuggets of a certain size, at a maximum possible depth. Most detectors will find a very large nugget just beneath the surface, however a detector’s sensitivity to gold
determines how many smaller nuggets will ultimately be recovered in difficult (noisy) ground at greater depths.
An 18 kHz detector will normally have a depth advantage on nuggets ≥ 1.0g over a basic mid-frequency detector, and a 71 kHz detector will have a depth advantage on
nuggets ≤ 0.1g. The advanced GOLD MONSTER 1000 uses an intermediate 45 kHz frequency AND a high speed 24-bit signal processor. This primary combination greatly
boosts sensitivity to gold beyond that of other single frequency VLF detectors over a wide range of nugget sizes, without introducing excess noise and false signals.
The GOLD MONSTER 1000 also has improved ferrous/non-ferrous discrimination and copes better with conductive (salty) soils
than higher frequency detectors, making it the perfect choice to maximise your gold recovery!
